Preliminary Study of the Spring-back/Spring-go Phenomenon in the V-Bending Process Using SGCC Steel Thin Material
DOI:
https://doi.org/10.36805/jtmmx.v3i2.3370Keywords:
ANOVA; Exsperimental method; Spring-back/spring-go; V-bending; V-die punchAbstract
This research analyses v-bending results using galvanized SGCC (JIS G 3302) sheet steel. The accuracy of the angle and dimensions of the bending results are the significant elements of the bending process that must be achieved. The bending spring-back/spring-go phenomenon has an impact on bending angle accuracy. If proper parameters are chosen, the spring-tub/spring-go angle should be minimized. This study aimed to see how the proposed v-bending process affected the spring-tub/spring-go angle value. An experimental approach was selected in this study. V-die bending opening, V-die punch angle, V-die punch speed, and bending force are all input parameters for the v-bending process. Meanwhile, in this study, galvanized steel with a thickness of 1.2 mm was used. The results of the ANOVA evaluation showed that the v-die punch speed and bending force are two parameters that affect the response of the variable, with a percentage contribution of 31.0% each. The minimum spring-back angle was found in the second sample, while the minimum spring-go angle was found in the fourth sample
References
K. Wibisono, “Pabrik baja galvanis KNSS pertama di Indonesia selesai 60 persen,” AntaraNews, Jakarta, Mar. 16, 2016. [Online]. Available: https://www.antaranews.com/berita/550415/pabrik-baja-galvanis-knss-pertama-di-indonesia-selesai-60-persen
BSN, “Galvanisasi (hot dip galvanized) pada besi dan baja fabrikasi - Spesifikasi dan metode pengujian,” 2004.
R. Mazumdar, “Government may force automakers to use 70 per cent galvanised steel in car body,” The Economic Times, Aug. 24, 2018. [Online]. Available: https://economictimes.indiatimes.com/industry/auto/auto-news/government-may-force-automakers-to-use-70-per-cent-galvanised-steel-in-car-body/articleshow/65535827.cms?from=mdr
R. Nana, dkk, “ANALISIS PENGARUH RADIUS BENDING PADA PROSES BENDING MENGGUNAKAN PELAT SPCC-SD TERHADAP PERUBAHAN STRUKTUR MIKRO,” vol. 01, no. 01, pp. 1–10, 2020.
K. Khoirudin, S. Sukarman, N. Rahdiana, and A. Fauzi, “ANALISIS FENOMENA SPRING-BACK / SPRING-GO FACTOR PADA LEMBARAN BAJA KARBON RENDAH MENGGUNAKAN PENDEKATAN EKSPERIMENTAL,” J. Teknol., vol. 14, no. 1, 2022.
S. Thipprakmas and W. Phanitwong, “Process parameter design of spring-back and spring-go in V-bending process using Taguchi technique,” Mater. Des., vol. 32, no. 8–9, pp. 4430–4436, 2011, doi: 10.1016/j.matdes.2011.03.069.
W. Phanitwong, A. Sontamino, and S. Thipprakmas, “Effects of part geometry on spring-back/spring-go feature in U-bending process,” Key Eng. Mater., vol. 549, pp. 100–107, 2013, doi: 10.4028/www.scientific.net/KEM.549.100.
B. Rahmani, G. Alinejad, and A. Gorji, “An investigation on springback / negative springback phenomena using finite element method and experimental approach,” vol. 223, pp. 841–850, 2009, doi: 10.1243/09544054JEM1321.
O. M. Badr, B. Rolfe, P. Hodgson, and M. Weiss, “Forming of high strength titanium sheet at room temperature,” Mater. Des., vol. 66, no. PB, pp. 618–626, 2015, doi: 10.1016/j.matdes.2014.03.008.
W. M. Chan, H. I. Chew, H. P. Lee, and B. T. Cheok, “Finite element analysis of spring-back of V-bending sheet metal forming processes,” J. Mater. Process. Technol., vol. 148, no. 1, pp. 15–24, 2004, doi: 10.1016/j.jmatprotec.2003.11.038.
C. C. Chen, “Experimental study on punch radius and grain size effects in V-bending process,” Mater. Manuf. Process., vol. 29, no. 4, pp. 461–465, 2014, doi: 10.1080/10426914.2014.880468.
İ. Karaağaç, “The Experimental Investigation of Springback in V-Bending Using the Flexforming Process,” Arab. J. Sci. Eng., vol. 42, no. 5, pp. 1853–1864, 2017, doi: 10.1007/s13369-016-2329-6.
G. E. Dieter, Mechanical Metallurgy. New Delhi: McGraw Hill, 2013.
S. Sukarman, A. D. Shieddieque, C. Anwar, N. Rahdiana, and A. I. Ramadhan, “Optimization of Powder Coating Process Parameters in Mild Steel (Spcc-Sd) To Improve Dry Film Thickness,” J. Appl. Eng. Sci., vol. 19, no. 2, pp. 1–9, 2021, doi: 10.5937/jaes0-26093.
JIS G 4404, “Alloy Tool Steels.” 2015.
Mintab, “Select the options for Analyze Taguchi Design (Static).” https://support.minitab.com/en-us/minitab/19/help-and-how-to/statistical-modeling/doe/how-to/taguchi/analyze-taguchi-design/perform-the-analysis/select-the-options-static-design/?SID=63406 (accessed Aug. 10, 2020).
A. Hidayat, “Penjelasan Lengkap ANOVA Sebagai Analisis Statistik,” Statistikian, 2017. https://www.statistikian.com/2017/06/anova-sebagai-analisis-statistik.html
K. Khoirudin, S. Sukarman, N. Rahdiana, and A. Fauzi, “ANALISIS FENOMENA SPRING-BACK / SPRING-GO FACTOR PADA LEMBARAN BAJA KARBON RENDAH MENGGUNAKAN,” vol. 14, no. 1, 2022.
K. Khoirudin, S. Sukarman, S. Siswanto, N. Rahdiana, and A. Suhara, “Analysis of Spring-back and Spring-go on Variation of V-Dies Bending Angle Using Galvanized SGCC Steel Sheet,” J. Tek. Mesin Mech. Xplore, vol. 3, no. 1, pp. 17–25, 2022.
T. Altan, Metal Forming Handbook, no. 5. Springer Verlag Berlin, 1998. doi: 10.1007/978-3-642-58857-0.
R. Kusnadi, A. Abdulah, M. Rizkiyanto, A. Amir, S. Sukarman, and D. Setiawan, “Analysis of the Springback Phenomenon of the Material Aluminium Alloy 6063-T5 With Punch Angle Variation,” J. Tek. Mesin Mech. Xplore, vol. 3, no. 1, pp. 34–39, 2022.
M. Özdemir, “Mathematical Modeling of the Effect of Different Parameters on Spring Back in Sheet Metal Formability Process,” Am. J. Eng. Res., no. 6, pp. 198–205, 2017, [Online]. Available: www.ajer.org
JIS G 3302, “JIS G 3302 Hot-dip zinc-coated steel sheet and strip.” Japanese Industrial Standard, 2007.
S. Sukarman, A. Abdulah, A. D. Shieddieque, N. Rahdiana, and K. Khoirudin, “OPTIMIZATION OF THE RESISTANCE SPOT WELDING PROCESS OF SECC-AF AND SGCC GALVANIZED STEEL SHEET USING THE TAGUCHI METHOD,” SINERGI, vol. 25, no. 3, pp. 319–328, 2021, doi: https://dx.doi.org/10.22441/sinergi.2021.3.9.
R. G. Brereton, “ANOVA tables and statistical significance of models,” J. Chemom., vol. 33, no. 3, pp. 1–5, 2019, doi: 10.1002/cem.3019.
