Main Article Content

Abstract

Work aids are tools used to make it easier for workers to carry out their daily activities to lighten a job. At PT XYZ found several complaints of muscle pain in several parts of the worker's body in the window patching section. To reduce the complaints experienced by window patching operators, the method used is the Standard Nordic Questionnaire and Ergonomics. This method is used to identify the source of the cause of muscle fatigue at work while ergonomics is used to determine the dimensions of the assistive devices to be designed according to human anthropometry. Calculation of the overall percentage of each of the questionnaire questions, obtained an average of the largest complaints on the body of the right upper arm by 68.8%, right elbow by 87.5%, right forearm by 81.3%, and wrist right hand by 87.5%. The results of making a manual window patching tool using the 50th percentile with a table height tool size of 88 cm, a tool width of 38 cm, a tool length of 43 cm, a beam width of 18 cm, and a pushing distance of 71 cm.
Keywords: Tool Design; Window patching; SNQ; Ergonomics; Anthropometry


 

Keywords

Tool Design; Window patching; SNQ; Ergonomics; Anthropometry; Rancangan Alat Bantu; Window Patcing; SNQ; Ergonomi; Antropometri

Article Details

References

  1. Aditya, J. 2020. Analisis Risiko Musculoskeletal Disorders (MSDs) pada Operator Pengelasan (Welding) Bagian Manufakturing di PT X. Jurnal Kajian dan Pengembangan Kesehatan Masyarakat.
  2. Andriani, M., Suria, A., & Hasan, M. T. (2019). Peningkatan Pendapatan Masyarakat Pesisir Melalui Perancangan Alat Pembuka Kulit Tiram. Global Science Society: Jurnal Ilmiah Pengabdian Kepada Masyarakat.
  3. Cahya, F., & Susanto, W. H. 2014. Pengaruh Pohon Pasca Sadap Dan Kematangan Buah Kelapa Terhadap Sifat Fisik, Kimia, Organoleptik Pasta Santan [In Press Oktober 2014]. Jurnal Pangan dan Agroindustri.
  4. Ginting, R. 2017. Penggunakan Kuesioner SNQ untuk Analisis Keluhan Rasa Sakit yang Dialami Pekerja pada UKM Kerupuk di Kota Medan. Jurnal Sistem Teknik Industri.
  5. Hutabarat, J, 2017. Dasar-dasar Pengetahuan Ergonomi. MNC: Malang. Jakarta.
  6. Jalma, M. D., & Zachreini, I. 2016. Efektivitas Hambatan Senyawa Ekstrak Kasar Pliek U (Patarana) terhadap Pertumbuhan Salmonella typhi in vitro. Cermin Dunia Kedokteran.