A Comprehensive Investigation of Deep Drawing Processes for a 2-Inch Diameter Dop-pipe Cap: Numerical and Experimental Analysis
DOI:
https://doi.org/10.36805/jtmmx.v4i2.6101Keywords:
Deep drawing, Dop-pipe cap, Displacement, Numerical and experimental analysisAbstract
The persistent challenges in material forming processes arise from recurrent issues encountered during the deep drawing process, particularly involving cracks and deviations from standard thickness dimensions. This article investigates the deep drawing process using both experimental and numerical methodologies. The experimental approach employs a 40-ton capacity power press machine, while the numerical method utilizes the ABAQUS student version software. SPCC-SD (JIS G3141) is the selected material for producing a Dop-pipe 2-inch diameter pipe cap in both approaches. Noteworthy findings include the highest positive and negative correlations observed in elements E 46 and E 48, with values of 0.715 and -0.933, respectively. Minimal disparities, averaging around 4.6% for all components, were evident between the experimental and numerical methodologies. The numerical approach yielded predictive results identifying potential issues in elements E 47 and E 48. This observation did not reveal instances of tearing failure but instead showcased an increase in thickness due to a higher axial force between the dies and punched-in components. The study successfully and accurately predicted product thickness for all components, presenting a contrast with outcomes obtained through the experimental method. Furthermore, this research advances the deep drawing process, extending its applicability to broader material forming applications and ultimately enhancing overall production process efficiency.
References
B. Vukota, "Sheet Metal Forming Fundamentals," Industrial Press Inc., pp. 450-450, 2004.
O. M. Badr, B. Rolfe, P. Hodgson, and M. Weiss, "Forming of high strength titanium sheet at room temperature," Materials and Design, vol. 66, no. PB, pp. 618-626, 2015.
B. Chongthairungruang, V. Uthaisangsuk, S. Suranuntchai, and S. Jirathearanat, "Springback prediction in sheet metal forming of high strength steels," Materials and Design, vol. 50, pp. 253-266, 2013.
C. Özek and M. Bal, "The effect of die/blank holder and punch radiuses on limit drawing ratio in angular deep-drawing dies," The International Journal of Advanced Manufacturing Technology, vol. 40, no. 11-12, pp. 1077-1083, 2008.
S. Candra, I. M. L. Batan, W. Berata, and A. S. Pramono, "Analytical Study and FEM Simulation of the Maximum Varying Blank Holder Force to Prevent Cracking on Cylindrical Cup Deep Drawing," Procedia CIRP, vol. 26, pp. 548-553, 2015.
M. Kardan, A. Parvizi, and A. Askari, "Experimental and Finite Element Results for Optimization of Punch Force and Thickness Distribution in Deep Drawing Process," Arabian Journal for Science and Engineering, vol. 43, no. 3, pp. 1165-1175, 2017.
V. Gautam, V. M. Raut, and D. R. Kumar, "Analytical prediction of springback in bending of tailor-welded blanks incorporating effect of anisotropy and weld zone properties," Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 232, no. 4, pp. 294-306, 2018.
A. Badrish, A. Morchhale, N. Kotkunde, and S. K. Singh, "Influence of material modeling on warm forming behavior of nickel based super alloy," International Journal of Material Forming, vol. 13, no. 3, pp. 445-465, 2020.
N. Şen, İ. ÇOlakoĞLu, and V. TaŞDemİR, "Investigation of deep drawing of square cups using high-strength DP600 and DP800 sheets," International Journal of Automotive Science And Technology, vol. 5, pp. 378-385, 2021.
M. Hassan, L. Hezam, M. El-Sebaie, and J. Purbolaksono, "Deep Drawing Characteristics of Square Cups through Conical Dies," Procedia Engineering, vol. 81, pp. 873-880, 2014.
H. Kalkan, T. Hacaloglu, and B. Kaftanoglu, "Experimental investigation of friction in deep drawing," The International Journal of Advanced Manufacturing Technology, vol. 92, no. 9-12, pp. 3311-3318, 2017.
K. Mori, Y. Abe, K. Osakada, and S. Hiramatsu, "Plate forging of tailored blanks having local thickening for deep drawing of square cups," Journal of Materials Processing Technology, vol. 211, no. 10, pp. 1569-1574, 2011.
Y. Morishita, T. Kado, S. Abe, Y. Sakamoto, and F. Yoshida, "Role of counterpunch for square-cup drawing of tailored blank composed of thick/thin sheets," Journal of Materials Processing Technology, vol. 212, no. 10, pp. 2102-2108, 2012.
D. H. Park and P. K. D. V. Yarlagadda, "Effects of punch load for elliptical deep drawing product of automotive parts," The International Journal of Advanced Manufacturing Technology, vol. 35, no. 7-8, pp. 814-820, 2006.
R. Dwivedi and G. Agnihotri, "Study of Deep Drawing Process Parameters," Materials Today: Proceedings, vol. 4, no. 2, pp. 820-826, 2017.
I. B. Rahardja, N. Rahdiana, D. Mulyadi, S. Sumanto, A. I. Ramadhan, and S. Sukarman, "ANALISIS PENGARUH RADIUS BENDING PADA PROSES BENDING MENGGUNAKAN PELAT SPCC-SD TERHADAP PERUBAHAN STRUKTUR MIKRO," vol. 01, no. 01, pp. 1-10, 2020.
P. Muthu, "Optimization of the Process Parameters of Resistance Spot Welding of AISI 316l Sheets Using Taguchi Method," Mechanics and Mechanical Engineering, vol. 23, no. 1, pp. 64-69, 2019.
A. Wübbeke et al., "Investigation of residual stresses in polypropylene using hot plate welding," Welding in the World, vol. 64, no. 10, pp. 1671-1680, 2020.
A. Abdurahman, S. Sukarman, A. Djafar Shieddieque, S. Safril, D. Setiawan, and N. Rahdiana, "EVALUASI KEKUATAN UJI TARIK PADA PROSES PENGELASAN BUSUR LISTRIK BEDA MATERIAL SPHC DAN S30-C," Jurnal Teknik Mesin Mechanical Xplore, vol. 1, no. 2, pp. 29-37, 2021.
S. Sukarman et al., "OPTIMAL TENSILE-SHEAR STRENGTH OF GALVANIZED/MILD STEEL (SPCC-SD) DISSIMILAR RESISTANCE SPOT WELDING USING TAGUCHI DOE," Jurnal Teknologi, vol. 4, pp. 167-177, 2023.
F. Mucharom et al., "Tensile shear load in resistance spot welding of dissimilar metals: An optimization study using response surface methodology," Mechanical Engineering for Society and Industry, vol. 3, no. 2, pp. 66-77, 2023.
T. Altan, Metal Forming Handbook. Springer Verlag Berlin, 1998.
R. LeSar and R. LeSar, "Materials selection and design," Introduction to Computational Materials Science, pp. 269-278, 2013.
S. K. Ghosh, "Handbook of metal forming," vol. 16, ed, 1988, pp. 353-356.
Sukarman, C. Anwar, N. Rahdiana, and A. I. Ramadhan, "ANALISIS PENGARUH RADIUS DIES TERHADAP SPRINGBACK LOGAM LEMBARAN STAINLESS-STEEL PADA PROSES BENDING HIDROLIK V-DIE," Junal Teknologi, vol. 12, no. 2, 2020.
K. Khoirudin, S. Sukarman, N. Rahdiana, and A. Fauzi, "ANALISIS FENOMENA SPRING-BACK / SPRING-GO FACTOR PADA LEMBARAN BAJA KARBON RENDAH MENGGUNAKAN PENDEKATAN EKSPERIMENTAL," Jurnal Teknologi, vol. 14, no. 1, 2022.
K. Khoirudin, S. Sukarman, S. Siswanto, N. Rahdiana, and A. Suhara, "Analysis of Spring-back and Spring-go on Variation of V-Dies Bending Angle Using Galvanized SGCC Steel Sheet," Jurnal Teknik Mesin Mechanical Xplore (JTMMX), vol. 3, no. 1, pp. 17-25, 2022.
S. Sukarman, K. Khoirudin, M. Murtalim, D. Mulyadi, and N. Rahdiana, "Evaluasi Desain Bejana Bertekanan pada Radiator Cooling System Menggunakan Material SPCC-SD," Rekayasa: Journal of Science adn Technology, vol. 14, no. 1, pp. 10-16, 2021.
B.-S. Kang, W.-J. Song, and T.-W. Ku, "Study on process parameters and its analytic application for nonaxisymmetric rectangular cup of multistage deep drawing process using low carbon thin steel sheet," The International Journal of Advanced Manufacturing Technology, vol. 49, no. 9-12, pp. 925-940, 2009.
D. Nettleton, "Selection of Variables and Factor Derivation," in Commercial Data Mining, 2014, pp. 79-104.
S. Kalpakjian and S. R. Schmid, Manufacturing Engineering and Technology, Six ed. New York: Pearson Prentice Hall, 2010, pp. 399-400.
V. Kotu and B. Deshpande, "Classification," in Data Science, 2019, pp. 65-163.
