Technical Evaluation of Elevator Performance and Capacity Planning in High-Rise Apartment Towers: A Case Study in Jakarta
DOI:
https://doi.org/10.36805/jtmmx.v6i1.10413Kata Kunci:
Carrying capacity, Energy efficiency, Elevator system, High-rise partment, Peak loadAbstrak
Elevator systems are critical for ensuring efficient vertical mobility, safety, and occupant comfort in high-rise residential buildings. This study presents a comprehensive performance evaluation of the elevator system in a three-tower apartment complex in Jakarta, Indonesia. The analysis integrates both qualitative and quantitative methods to assess key performance indicators, including peak load demand, round-trip time, handling capacity, recommended number of elevator units, waiting time, and estimated daily energy consumption. The peak load during the initial five-minute interval was found to range from 23 to 48 persons per tower. Elevator speeds were set at 180 m/min for Tower 1 and 150 m/min for Towers 2 and 3, resulting in round-trip time values between 183 and 208 seconds. The estimated handling capacities varied from 54 to 69 persons per elevator. To ensure optimal service performance and redundancy, four elevator units are recommended for Tower 1, and three units each for Towers 2 and 3. The projected daily energy consumption, based on a five-hour operational window, ranges from 80.51 to 96.61 kWh. The findings offer practical insights for designing energy-efficient and service-optimized elevator systems in high-density urban residential developments.
Referensi
K. Tarigan and E. Togatorop, “Perencanaan Elevator Penumpang Pada Gedung Bertingkat Dengan Kapasitas 500 kg di Yanglim Plaza Medan,” J. Teknol. Mesin Uda, vol. 3, no. 1, pp. 1–11, 2022.
D. Almanda and I. T. Ramadhan, “Analisis Kebutuhan Motor Listrik Untuk Meningkatkan Efisiensi Waktu Tunggu Elevator,” Resist. (Elektronika Kendali Telekomun. Tenaga List. Komputer), vol. 4, no. 2, p. 91, 2021, doi: 10.24853/resistor.4.2.91-96.
A. Fahriansyah, B. Hartadi, and F. Herlina, “Perencanaan Lift Penumpang Dengan Sistem Penggerak Tipe Traksi Kapasitas 600 Kg Untuk Keperluan Gedung Rumah Sakit Studi Kasus Rs Sumber Jaya Sehat Kandangan,” 2021, [Online]. Available: http://eprints.uniska-bjm.ac.id/id/eprint/9140
K. Yanel, “CONSTRUCTION OF A GOODS ELEVATOR WITH A MANUAL,” J. Teknol. dan Vokasi, vol. 3, no. 1, pp. 42–48, 2025, doi: https://doi.org/10.21063/jtv.2025.3.1.42-48.
P. K. Man, C. N. Wong, W. K. Chan, H. H. Lee, J. Huang, and M. Pecht, “Reliability and safety of elevators and escalators/ travelators: Past, present and future,” Results Eng., vol. 25, no. October 2024, p. 104194, 2025, doi: 10.1016/j.rineng.2025.104194.
J. H. Ang, Y. Yusup, S. A. Zaki, A. Salehabadi, and M. I. Ahmad, “Comprehensive Energy Consumption of Elevator Systems Based on Hybrid Approach of Measurement and Calculation in Low-and High-Rise Buildings of Tropical Climate towards Energy Efficiency,” Sustain., vol. 14, no. 8, pp. 1–21, 2022, doi: 10.3390/su14084779.
H. Sekmen and Y. A. Onur, “Mechanical properties of elevator ropes and belts exposed to corrosion and elevated temperatures,” Mater. Test., vol. 66, no. 2, pp. 262–270, 2024, doi: 10.1515/mt-2023-0232.
Y. Oh, M. Kang, K. Lee, and S. Kim, “Construction management solutions to mitigate elevator noise and vibration of high-rise residential buildings,” Sustain., vol. 12, no. 21, pp. 1–21, 2020, doi: 10.3390/su12218924.
A. S. R. Bambang Setyo Panulisan, Dedy Khaerudin, “Analisa Kinerja Lift Gedung D Kampus 1 Universitas Bina Bangsa Serang,” Mars J. Tek. Mesin, Ind. Elektro Dan Ilmu Komput., vol. 2, no. 1, 2024, doi: https://doi.org/10.61132/mars.v2i1.79.
Mohammad Sheva Subairi, Rahayu Pradita, and Mohamad Galuh Khomari, “Perhitungan Kapasitas Lift Sebagai Sarana Transportasi Vertikal Pada Gedung Bertingkat,” J. Ris. Tek. Sipil dan Sains, vol. 2, no. 2, pp. 70–77, 2024, doi: 10.57203/jriteks.v2i2.2024.70-77.
M. Soyaslan, O. Eldogan, A. Fenercioglu, Y. Avsar, N. Ceylan, and M. S. Sarıkaya, “Efficiency Optimization of PMSM-Type Elevator Machine: An Industrial Comparison,” Machines, vol. 13, no. 3, 2025, doi: 10.3390/machines13030173.
M. Kasaf, R. Pradita, H. Widiyanti, and S. Anandita, “EVALUASI WAKTU TEMPUH PENGUNJUNG ELEVATOR PADA AREA WEST MALL DI GRAND INDONESIA,” Edusaintek J. Pendidikan, Sains dan Teknol., vol. 11, no. 4, pp. 2144–2158, 2024, doi: https://doi.org/10.47668/edusaintek.v11i4.1421.
B. P. Alam, R. Mentari, and ..., “Kenyamanan Pengunjung Terhadap Waktu Tunggu Lift Di Rumah Sakit Pasar Rebo, Jakarta Timur,” … Nas. Ilm. Call …, no. November, pp. 729–737, 2019, doi: 10.30998/simponi.v0i0.423.
T. Kim, J. Han, S. Seong, and J. D. Son, “Round-trip time calculation of both full-floor and high-rise elevators considering passengers’ arrival rates,” ICIC Express Lett., vol. 15, no. 4, pp. 383–387, 2021, doi: 10.24507/icicel.15.04.383.
C. OBİNECHE, B. O. UNANKA, E. NKECHİ UDOCHUKWU, A. E. AKUWUDİKE, and O. CHİNWENDU AUGUSTİNA, “Design and Performance Evaluation of a Variable Speed Bucket Elevator,” Turkish J. Agric. Eng. Res., vol. 4, no. 2, pp. 225–238, 2023, doi: 10.46592/turkager.1378650.
A. D. Sapto, M. S. Islam, and D. K. Utomo, “2021 - Perancangan dan analisis sistem penggerak prototipe,” J. Tek. Mesin Indones., vol. 16, no. 2, pp. 1–6, 2021.
L. Deswindi and M. Lusiani, “Penentuan Sistem Kerja Lift Berdasarkan Kecepatan Angkut dengan Menggunakan Simulasi ProModel (Studi Pada Sarana Lift di Universitas Bunda Mulia),” JIEMS (Journal Ind. Eng. Manag. Syst., vol. 1, no. 2, pp. 14–27, 2017.
N. R. Baimy Alexander, “PENGARUH PANJANG INTAKE MANIFOLD TERHADAP PERFORMA MESIN SEPEDA MOTOR INJEKSI 108 CC,” Rotary, vol. 6, no. 2, pp. 159–170, 2024, doi: 10.20527/jtam.
V. Lanisa and A. Rajagukguk, “Power Capacity and Speed Analysis for Elevator Motors at Madani Hospital Pekanbaru,” Int. J. Electr. Energy Power Syst. Eng., vol. 6, no. 2, pp. 156–160, 2023, doi: 10.31258/ijeepse.6.2.156-160.
K. Al-Kodmany, “Smart Elevator Systems,” J. Mech. Mater. Mech. Res., vol. 6, no. 1, pp. 41–53, 2023, doi: 10.30564/jmmmr.v6i1.5503.
Sunarno (2006), Mekanikal Elektrikal. Yogyakarta: Andi.
Unduhan
Diterbitkan
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2025 Jurnal Teknik Mesin Mechanical Xplore
Artikel ini berlisensi Creative Commons Attribution 4.0 International License.
