Article Sidebar

Submitted
Jul 9, 2024
Accepted
Sep 4, 2024
Published
Sep 10, 2024
Download
DOWNLOAD PDF
Statistic
Read Counter : 0 Download : 0

Main Article Content

Abstract

Industrial developments, especially in the manufacturing and construction sectors, recognize L-hanger ducting as a critical component in HVAC (heating ventilation and air conditioning) ducting systems, which play a role in supporting and stabilizing air ducts. The L-Hanger ducting manufacturing process involves a series of stages, such as shearing, blanking, piercing, trimming, and bending processes. This research focuses on the design and simulation of dies and punches for piercing, blanking, and bending processes using 1.6 mm-thick SPCC-SD material. The aim of this research is to design and analyze progressive dies in order to increase the efficiency of the production process. A comprehensive calculation of the forces involved in the shearing, blanking, piercing, trimming, and bending processes is required in order to predict press machine tonnage requirements to support the production process. This research applies theoretical and numerical validation approaches. Theoretical analysis is used to calculate the overall forces, which are then compared with numerical results and verified through an experimental approach. By understanding and optimizing the design of progressive dies, it is hoped that we can increase the production efficiency of L-hanger Ducting and expand knowledge in the field of metal forming, contributing to the metal forming industry and supporting the development of science.

Keywords

L-hanger ducting Progressive dies Metal forming Force bending Heating ventilation and air conditioning

Article Details

How to Cite
Budiansyah, A. C., Taufik Ulhakim, M., Sukarman, S., Supriyanto, A., Amir, A., Mulyadi, D., & Khoirudin, K. (2024). Progressive Dies for L-hanger Ducting (L-HD) Utilizing Low-Carbon Steel SPCC-SD Material: An Experimental and Numerical Analysis. Jurnal Teknik Mesin Mechanical Xplore, 5(1), 24-37. https://doi.org/10.36805/jtmmx.v5i1.7763

References

  1. [1] I. Suchi, Handbook of Die Design 2nd Edition, 1998. [Online]. Available.
  2. [2] S. Sukarman et al., "The Square cup deep drawing: Technology transfer from experts to increase production in small and medium enterprise (SME) groups," Mechanical Engineering for Society and Industry, vol. 4, no. 1, pp. 38-49, 2024.
  3. [3] Khoirudin, Sukarman, D. Mulyadi, A. Fauzi, and N. Rahdiana, "Evaluate the spring-back/spring-go phenomenon in low carbon steel sheet v-bending using an experimental method," presented at the 3rd International Conference of Bio-Based Economy for Application and Utility, 2023.
  4. [4] N. Rahdiana, Sukarman, Khoirudin, A. Abdulah, and A. D. Shieddieque, "Spring-Back Analysis of the Vee Bending Process for High-Strength Stainless Steel," Jurnal Teknologi, vol. 85, no. 3, pp. 135-144, 2023.
  5. [5] K. Khoirudin, S. Sukarman, S. Siswanto, N. Rahdiana, and A. Suhara, "Analysis of Spring-back and Spring-go on Variation of V-Dies Bending Angle Using Galvanized SGCC Steel Sheet," Jurnal Teknik Mesin Mechanical Xplore (JTMMX), vol. 3, no. 1, pp. 17-25, 2022.
  6. [6] H. S. Payal and T. R. Gupta, "Effect of Die and Punch Geometry on Spring Back in Air Bending of Electrogalvanized CR4 Steel," International Journal of Applied Engineering Research, vol. 12, no. 11, 2017.
  7. [7] S. F. d. S. Yuris, "Proses Drawing Bending Dies Bracket Bolster Isuzu Traga," Science And Engineering National Seminar 4, vol. 4, pp. 183–192, 2019.
  8. [8] S. d. Jumadi, "Perancangan Compound Dies untuk Proses Blanking dan Piercing Cylinder Head Gasket Tipe TVS-N54," SINTEK J. Mesin Teknologi, vol. 1, pp. 23-30, 2017.
  9. [9] A. Arora, A. Pathak, A. Juneja, P. Shakkarwal, and R. Kumar, "Design & analysis of progressive die using SOLIDWORKS," Materials Today: Proceedings, vol. 51, pp. 956-960, 2022.
  10. [10] W. W. R. C. Ardinto, E.Surojo, "Perancangan Progresive Dies Komponen Ring M7 Keywords : Abstract " MEKANIKA, vol. 11, pp. 37-40, 2012.
  11. [11] S. Chatti, M. Hermes, A. E. Tekkaya, and M. Kleiner, "The new TSS bending process: 3D bending of profiles with arbitrary cross-sections," CIRP Annals, vol. 59, no. 1, pp. 315-318, 2010.
  12. [12] M. F. Adnan, A. B. Abdullah, and Z. Samad, "Springback behavior of AA6061 with non-uniform thickness section using Taguchi Method," The International Journal of Advanced Manufacturing Technology, vol. 89, no. 5-8, pp. 2041-2052, 2016.
  13. [13] G. M. S. Ahmed, H. Ahmed, M. V. Mohiuddin, and S. M. S. Sajid, "Experimental Evaluation of Springback in Mild Steel and its Validation Using LS-DYNA," Procedia Materials Science, vol. 6, pp. 1376-1385, 2014.
  14. [14] E. H. Ouakdi, R. Louahdi, D. Khirani, and L. Tabourot, "Evaluation of springback under the effect of holding force and die radius in a stretch bending test," Materials & Design, vol. 35, pp. 106-112, 2012.
  15. [15] Y. Y. E. d. K. Hamiraj, "Optimasi Pembuatan Produk Support Melalui Analisis Proses Single Tool Menjadi Progressive Hybrid Tool," Repository.Polman-Bandung.Ac.Id, vol. 2, pp. 1-6.
  16. [16] A. Adelkhani, H. Ebrahimi, and M. Attar, "The experimental and numerical study of the effects of welding angle on forming multilayered sheets in U-bending operations," Journal of Mechanical Science and Technology, vol. 34, no. 1, pp. 239-244, 2020.
  17. [17] A. Badrish, A. Morchhale, N. Kotkunde, and S. K. Singh, "Parameter Optimization in the Thermo-mechanical V-Bending Process to Minimize Springback of Inconel 625 Alloy," Arabian Journal for Science and Engineering, vol. 45, no. 7, pp. 5295-5309, 2020.
  18. [18] M. Özdemir, H. Dilipak, and B. Bostan, "Numerically modeling spring back and spring go amounts and bending deformations of Cr-Mo alloyed sheet material," Materialpruefung/Materials Testing, vol. 62, no. 12, pp. 1265-1272, 2020.
  19. [19] R. Srinivasan, D. Vasudevan, and P. Padmanabhan, "Influence of friction parameters on springback and bend force in air bending of electrogalvanised steel sheet: an experimental study," Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 36, no. 2, pp. 371-376, 2013.
  20. [20] S. Thipprakmas, "Spring-back factor applied for V-bending die design," Journal of Advanced Mechanical Design, Systems, and Manufacturing, vol. 14, no. 3, pp. JAMDSM0037-JAMDSM0037, 2020.
  21. [21] S. Thipprakmas and W. Phanitwong, "Process parameter design of spring-back and spring-go in V-bending process using Taguchi technique," Materials & Design, vol. 32, no. 8-9, pp. 4430-4436, 2011.
  22. [22] M. A. Wahed, A. K. Gupta, V. S. R. Gadi, S. K, S. K. Singh, and N. Kotkunde, "Parameter optimisation in V-bending process at elevated temperatures to minimise spring back in Ti-6Al-4V alloy," Advances in Materials and Processing Technologies, vol. 6, no. 2, pp. 350-364, 2020.
  23. [23] H. Y. Yu, "Variation of elastic modulus during plastic deformation and its influence on springback," Materials & Design, vol. 30, no. 3, pp. 846-850, 2009.
  24. [24] F. Z. J. Zhang, J. Ruan, dan K. He, "Study on springback behavior of carbon steel during single-point dieless forming based on neural network method," IOP Conference Series: Materials Science and Engineering, vol. 397, 2018.
  25. [25] S. Sukarman, A. D. Shieddieque, C. Anwar, N. Rahdiana, and A. I. Ramadhan, "Optimization of Powder Coating Process Parameters in Mild Steel (Spcc-Sd) To Improve Dry Film Thickness," Journal of Applied Engineering Science, vol. 19, no. 2, pp. 1-9, 2021.
  26. [26] I. B. Rahardja, N. Rahdiana, D. Mulyadi, S. Sumanto, A. I. Ramadhan, and S. Sukarman, "ANALISIS PENGARUH RADIUS BENDING PADA PROSES BENDING MENGGUNAKAN PELAT SPCC-SD TERHADAP PERUBAHAN STRUKTUR MIKRO," vol. 01, no. 01, pp. 1-10, 2020.
  27. [27] S. Sukarman, K. Khoirudin, M. Murtalim, D. Mulyadi, and N. Rahdiana, "Evaluasi Desain Bejana Bertekanan pada Radiator Cooling System Menggunakan Material SPCC-SD," Rekayasa: Journal of Science adn Technology, vol. 14, no. 1, pp. 10-16, 2021.
  28. [28] JIS G 3141, "JIS G 3141 Cold-reduced carbon steel sheets and strips," ed, 2005.
  29. [29] JIS G 4404 Alloy Tool Steels, 2015.
  30. [30] M. A. Rizza, "Analisis Proses Blanking dengan Simple Press Tool," Jurnal Rekayasa Mesin, vol. 5, pp. 85-90, 2014.
  31. [31] K. Khoirudin, S. Sukarman, N. Rahdiana, and A. Fauzi, "ANALISIS FENOMENA SPRING-BACK / SPRING-GO FACTOR PADA LEMBARAN BAJA KARBON RENDAH MENGGUNAKAN PENDEKATAN EKSPERIMENTAL," Jurnal Teknologi, vol. 14, no. 1, 2022.
  32. [32] I. Suchy, Handbook of Die Design, second ed. McGraw-Hill, 2006, pp. 327-327.
  33. [33] K. Khoirudin et al., "A Report on Metal Forming Technology Transfer from Expert to Industry for Improving Production Efficiency," Mechanical Engineering for Society and Industry, vol. 1, no. 2, pp. 96-103, 2021.
  34. [34] L. F. Folle and L. Schaeffer, "Evaluation of Contact Pressure in Bending under Tension Test by a Pressure Sensitive Film," Journal of Surface Engineered Materials and Advanced Technology, vol. 06, no. 04, pp. 201-214, 2016.
  35. [35] Y. Zhang and G. Cui, "Finite element simulation of springback in sheet metal bending," Proceedings - 2009 International Conference on Information Engineering and Computer Science, ICIECS 2009, pp. 1-4, 2009.
  36. [36] S. Sukarman, C. Anwar, N. Rahdiana, K. Khoirudin, and A. I. Ramahdan, "ANALISIS PENGARUH RADIUS DIES TERHADAP SPRINGBACK LOGAM LEMBARAN STAINLESS-STEEL PADA PROSES BENDING HIDROLIK V-DIE," Jurnal Teknologi, vol. 12, no. 2, pp. 123-132, 2 July 2020 2020.