Article Sidebar

Submitted
Jul 22, 2023
Accepted
Jul 23, 2023
Published
Jul 24, 2023
Download
PDF DOWNLOAD
Statistic
Read Counter : 283 Download : 145

Main Article Content

Abstract

Nowadays, global warming is a tremendous phenomena in the world. Every country trying to solve these conditions, including Indonesia that has a campaign to reduce the emission of CO and HC from vehicles. However, the number of vehicles is increasing every year. Based on that condition, the researchers are trying to modify the fuel with the additive. This work modified the gasoline with 10% ethanol additive addition and investigated the viscosity properties using Stokes law linear regression method and compared to pure gasoline. The viscosity properties are chosen by their effect on emission of vehicles. A low viscosity of fuel can reduce CO and HC in gas emission. Then, this work was finding that the viscosity of gasoline is decreased, but 10% of ethanol does not significantly change the characteristics of gasoline. Even so, the linear regression has successfully used as an analyzed method to determined the viscosity. Then, this finding also contributes to development of fuel in Indonesia to reduce the emission of CO and HC with the modified of gasoline using ethanol in the other concentration.

Keywords

Ethanol additive gasoline viscosity Stokes law linear regression

Article Details

How to Cite
Taufik Ulhakim, M., Karina Chintya, L., Suhara, A., Bertolomeus Haryanto, A., Ummah, A. R., & Nur, A. S. (2023). Ethanol additive addition to gasoline: viscosity investigation using stokes law linear regression. Jurnal Teknik Mesin Mechanical Xplore, 4(1), 1-7. https://doi.org/10.36805/jtmmx.v4i1.5612

References

  1. I. Gunawan, A. A. N. P. Redi, A. A. Santosa, M. F. N. Maghfiroh, A. H. Pandyaswargo, and A. C. Kurniawan, “Determinants of customer intentions to use electric vehicle in Indonesia: An integrated model analysis”, Sustainability., vol. 14, pp. 1972 (1-22), Feb, 2022.
  2. I. D. Wangsa, I. Vanany, and N. Siswanto, “The optimal tax incentive and subsidy to promote electric trucks in Indonesia: Insight for government and industry”, Case Stud. Transp. Policy., vol. 11, pp. 100966 (1-22), Mar, 2023.
  3. A. Purwadi, S. Suhandi, and U. Enggarsasi, “Urban air pollution control caused by exhaust gas emissions in developing country cities in public policy las perspective”, Int. J. Energy Econ. Policy., vol. 10, pp. 31-36, Nov, 2019.
  4. R. Iskandar, Sutiman, Sukoco, Z. Arifin, N. F. Adhka, and J. N. Rohman, “The quality of vehicle exhaust gas emission in Sleman, Indonesia in 2019”, J. Phys. Conf. Ser., vol. 1456, pp. 012030 (1-7), Jan, 2020.
  5. K. Tucki, R. Mruk, O. Orynycz, K. Botwinska, A. Gola, and A. Baczyk, “Toxicity of exhaust fumes (CO, NOx) of the compression-ignition (diesel) engine with the use of simulation”, Sustainability., vol. 11, pp. 2188 (1-15), Apr, 2019.
  6. S. Katekaew, C. Suiuay, K. Senawong, V. Seithtanabutara, K. Intravised, and K. Laloon, “Optimization of performance and exhaust emission of single-cylinder diesel engines fueled by blending diesel-like fuel from yang-hard resin with waste cooking oil biodiesel via response surface methodology”, Fuel., vol. 304, pp. 121434 (1-12), Jul, 2021.
  7. M. S. Gad and M. A. Ismail, “Effect of waste cooking oil biodiesel blending with gasoline and kerosene on diesel engine performance, emissions and combustion characteristics”, Process Saf. Environ. Prot., vol. 149, pp. 1-10, Oct, 2021.
  8. Y. Devarajan, D. Munuswamy, B. Nagappan, and G. Subbiah, “Experimental assessment of performance and exhaust emission characteristics of a diesel engine fuelled with punnai biodiesel/butanol fuel blends”, Pet. Sci., vol. 16, pp. 1471-1478, Aug, 2019.
  9. L. Aguado-Deblas, J. Hidalgo-Carrillo, F. M. Bautista, D. Luna, C. Luna, J. Calero, A. Posadillo, A. A. Romero, and R. Estevez, “Diethyl ether as an oxygenated additive for fossil diesel/vegetable oil blends: evaluation of performance and emission quality of triple blends on a diesel engine”, Energies., vol. 13, pp. 1542 (1-16), Mar, 2020.
  10. M. Mourad and K. Mahmoud, “Investigation into SI engine performance characteristics and emissions fuelled with ethanol/butanol-gasoline blends”, Renew. Energy., vol. 143, pp. 762-771, May, 2019.
  11. C. C. Lee, M. Tran, B. T. Tan, G. Scribano, and C. T. Chong, “A comprehensive review on the effects of additives on fundamental combustion characteristics and pollutant formation of biodiesel and ethanol”, Fuel., vol. 288, pp. 119749 (1-25), Nov, 2020.
  12. P. Sakthivel, K. A. Subramanian, and R. Mathal, “Comparative studies on combustion, performance and emission characteristics of a two-wheeler with gasoline and 30% ethanol-gasoline blend using chassis dynamometer”, Appl. Therm. Eng., vol. 146, pp. 726-737, Oct, 2018.
  13. M. Amine and Y. Barakat, “Properties of gasoline-ethanol-methanol ternary fuel blend compared with ethanol-gasoline and methanol-gasoline fuel blends”, Egypt. J. Pet., vol. 28, pp. 371-376, Sep 2019.
  14. R. Biswas, D. Saha, and R. Bandyopadhyay, “Quantifying the destructuring of a thixotropic colloidal suspension using falling ball viscometry”, Phys. Fluids., vol. 33, pp. 013103 (1-9), Jan, 2021.
  15. G. Chowdhry, Y. M. Chang, J. P. Frampton, and L. Kreplak, “Polymer entanglement drives formation of fibers from stable liquid bridges of highly viscous dextran solutions”, Soft Matter., vol. 17., pp. 1873 (1-8), Dec, 2020.
  16. S. Kohli, G. T. Godwin, and S. Urolagin, “Sales prediction using linear and KNN regression”, Advances in Machine Learning and Computational Intelligence., vol. 2621, pp. 321-329, Jul, 2020.
  17. S. Huang, J. Li, L. Liu, L. Zhou, and X. Tian, “Lossless fast drop self-transport on anisotropic omniphobic surfaces: origin and elimination of microcopic liquid residue”, Adv. Mater., vol. 31, pp. 1901417 (1-8), May, 2019.
  18. S. Susilawati, M. Satriawan, R. Rizal and S. Sutarno, “Fluid experiment design using video tracker and ultrasonic sensor device to improve understanding of viscosity concept”, J. Phys. Conf. Ser., vol. 1521, pp. 022039 (1-7), May, 2020.
  19. H. V. Wahl, T. Richter, S. Frei, and T. Hagameier, “Falling balls in a viscous fluid with contact: comparing numerical simulations with experimental data”, Phys. Fluids., vol. 33, pp. 033304 (1-18), Mar, 2021.
  20. M. Farhan, A. Gamayel and Ujiburrahman, “An addition of ethanol and patchouli oil on pertamax: The case study of their effect on exhaust gas emission for 4-stroke engine”, Jurnal Teknik Mesin Mechanical Xplore., vol. 3, pp. 87-95, Dec, 2022.
  21. A. Doyan, B. A. Qahfi, and Susilawati, “Determining the viscosity coefficient of fluids using a simple viscosity practical tool aided by arduino uno and magnetic sensor”, AMPLITUDO: Journal of Science & Technology InnovationI., vol. 2, pp. 34-37, Feb, 2023.
  22. N. Kesaulya, A. H. Amahoru, and M. A. Hertiavi, “Analysis of liquid viscosity value using falling ball method using digital image technology based on long exposure feature”, Edu Sciences J., vol. 1, pp. 108-117, Jul, 2020.
  23. M. S. M. Zaharin, N. R. Abdullah, H. H. Masjuki, O. M. Ali, G. Najafi, and T. Yusaf, “Evaluation on physicochemical properties of iso-butanol additives in ethanol-gasoline blend on performance and emission characteristics of a spark-ignition engine”, Appl. Therm. Eng., vol. 144, pp. 960-971, Aug, 2018.
  24. C. M. Santana, “Correlation between vibration level, lubricating oil viscosity and total number base of an internal combustion engine operated with gasoline and ethanol”, SAE International, Technical Paper, Mar 2022.
  25. S. Thiyagarajan, M. R. Herfatmanesh, V. E. Geo, and Z. Peng, “Experimental investigation into the effect of magnetic fuel reforming on diesel combustion and emissions running on wheat germ and pine oil”, Fuel. Process. Technol., vol. 186, pp. 116-124, Apr, 2019.